中文
News
News Center
News
学习专业散热风扇知识,了解最新行业动态
News
当前位置: 首页 News Industry trends Why and how to deal with the vibration of the DC cooling fan?
Why and how to deal with the vibration of the DC cooling fan?

Industry trends|2022-10-18|毅荣川电子

In our life, cooling fans are unfamiliar to us, especiallyCooling fan DCIt is widely used in equipment. The cooling fan sometimes shakes when it is used. What causes this? What effect does shaking have on the cooling fan?

The vibration and vibration of the cooling fan may be caused by the following reasons: the quality problem produced by the cooling fan manufacturer or the purchase of relatively cheap raw materials, or the looseness of the stator and rotor may be caused by falling, impact and violent handling during the transportation process. Also pay attention to the roughness of the fan blade surface and the lack of dynamic balance test for the mold fineness. One of these reasons can cause the cooling fan to shake.

33.jpg


If the cooling fan shakes seriously after being used for a period of time, the cooling fan is not cleaned and maintained properly after being used for a long time, and the cooling fan dust is accumulated, and the fan blade has been damaged due to the impact of debris during operation. In addition, when installing, the four corners of the mounting screws are not the same or the four corners are not in the same plane, which causes the installation of the cooling fan to slightly change its center, and the vibration of the cooling fan will affect its service life and mute effect.

How to check the cooling fan vibration:

1. Remove the cooling fan first. The small cooling fan can be fixed with one hand, and the large cooling fan can be fixed with two hands, which is dangerous to some extent. Non-professional personnel should not test. If the vibration and vibration of the removal test are significantly improved, consider whether the installation angle and installation method are correct.

2. When the shaking and vibration of the cooling fan test remain unchanged, the frame and fan blade should be checked for shaking. If it is possible that the bearing is damaged, it cannot be used anymore and needs to be replaced. Here, the longer and more durable ball bearing is recommended.

3. If the above two conditions cannot be thrown out, dust and impurities of the fan and the ventilation pipe shall be cleaned to confirm that the installation is correct. If there are still faults, the quality problem or poor quality of the cooling fan shall be considered.

For more product knowledge, please consult Shenzhen Yirongchuan cooling fan manufacturer.

扫码咨询

服务热线18576680589

Shenzhen Yirongchuan Electronic Technology Co., Ltd
Tel.: 0755-33199478
Email: xiaoq.hou@yirongchuan.com
Address: Floor 4, Block A, Building 1, Hongfa Innovation Park, Jinzhujiao, Jiuwei Community, Hangcheng Street, Bao'an District, Shenzhen
Copyright @ Shenzhen Yirongchuan Electronic Technology Co., Ltd
Yue ICP Bei No. 13073947 备案图标.png

YGZAB No. 44030602007107

Baidu
map